Enclosure Configuration; Cable Access And Management; Ground Connection; Specifications - Tripp-Lite SmartRack SRWF12U38 El Manual Del Propietario

6. Enclosure Configuration

6.1. Cable Access and Management

The top, bottom and sides of the cabinet contain rectangular openings (four total) for cable access and management. These can be opened or
closed by unscrewing or screwing the removable cable access panel.
For improved cooling efficiency and a cleaner installation appearnce, all cable access holes are compatible with Tripp Lite's SRBRUSHWM
Brush Strip Plate accessory. The brush strip plate securely fits into the cable routing panel to block unwanted airflow. For more information, visit
www.tripplite.com.

6.2. Ground Connection

All parts of the enclosure are grounded to the frame. Use the enclosure's front or rear threaded grounding point and an M6 screw to connect
the frame directly to your facility's earth ground connection with an 8 AWG (3.264 mm) wire. Warning: Attach each enclosure to earth
ground separately. Do not use the enclosure without an earth ground connection.

7. Specifications

Model
Total Rack Units
Patch Panel Rack Units
Equipment Rack Units
Backplate Depth
Unit Dimensions (H x W x D)
Unit Weight

8. Storage and Service

Storage
The enclosure should be stored in a controlled indoor environment, away from moisture, temperature extremes, flammable liquids and gasses,
conductive contaminants, dust and direct sunlight. Store the enclosure in its original shipping container if possible.
Service
Your Tripp Lite product is covered by the warranty described in this manual. A variety of Extended Warranty and On-Site Service Programs are
also available from Tripp Lite. For more information on service, visit www.tripplite.com/support. Before returning your product for service, follow
these steps:
1. Review the installation and operation procedures in this manual to insure that the service problem does not originate from a misreading of
the instructions.
2. If the problem continues, do not contact or return the product to the dealer. Instead, visit www.tripplite.com/support.
3. If the problem requires service, visit www.tripplite.com/support and click the Product Returns link. From here you can request a Returned
Material Authorization (RMA) number, which is required for service. This simple on-line form will ask for your unit's model and serial
numbers, along with other general purchaser information. The RMA number, along with shipping instructions will be emailed to you. Any
damages (direct, indirect, special or consequential) to the product incurred during shipment to Tripp Lite or an authorized Tripp Lite service
center is not covered under warranty. Products shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation
charges prepaid. Mark the RMA number on the outside of the package. If the product is within its warranty period, enclose a copy of your
sales receipt. Return the product for service using an insured carrier to the address given to you when you request the RMA.
16-04-227-9335C5.indb 7
SRWF12U38
12U
4U
8U
4.65 in. / 118 mm
38 x 19.7 x 16 in. / 965 x 500 x 408 mm
66 lb. / 30 kg
SRWF16U38
16U
4U
12U
4.65 in. / 118 mm
38 x 19.7 x 23.1 in. / 965 x 500 x 587 mm
81.5 lb. / 37 kg
7
9/2/2016 10:19:06 AM