Assembly Instructions; Operation Instructions - Macpower SF-7 Manual De Instrucciones

Assembly Instructions

NOTE: This log splitter was partially assembled at the factory. Refer to the drawing and parts list should it
become necessary to repair replacement parts.
1) Remove all the components from the box. Inspect each piece for shipping damage. If any part is
damaged, contact your dealer or delivery carrier.
2) Securely fasten the foot of the log splitter to the main beam using the hardware provided.
Tools required: 14mm" wrench
WARNING: Read and thoroughly understand all instructions and safety information
before operating this log splitter. Failure to do so may cause serious injury or death.
Do not allow anyone to operate this log splitter who has not read this manual. As with
all power equipment, a log splitter can be dangerous if assembled or used improperly.
Do not operate this log splitter if you have doubts or questions concerning safe
operation. Contact the dealer

Operation Instructions

WARNING:
DANGER:
1. Place the log splitter on a sturdy, level surface.
2. Ensure the equipment is in safe working condition. Check all nuts and bolts are tight. Check the
switch, power cable and plug are not damaged. Check that all safety shields are in proper
position.
Page 6
to address these concerns.
ALWAYS WEAR SAFETY GLASSES, SAFETY GLOVES, SAFETY SHOES
AND SUITABLE WORK CLOTHING WHEN OPERATING THIS LOG
SPLITTER. NEVER WEAR JEWELRY, NECKTIES OR OTHER LOOSE
CLOTHING.
KEEP HANDS AND FEET CLEAR OF RAM AND WEDGE AT ALL TIMES.