Introduction; Intended Use; Scope Of Delivery; Parts Description - ULTIMATE SPEED ULGD 3.8 A1 Traducción Del Manual De Instrucciones Original

CAR BATTERY CHARGER
ULGD 3.8 A1

Introduction

We congratulate you on the purchase of your new
device. You have chosen a high quality product.
The instructions for use are part of the product.
They contain important information concerning
safety, use and disposal. Before using the product,
please familiarise yourself with all of the safety in-
formation and instructions for use. Only use the unit
as described and for the specified applications.
If you pass the product on to anyone else, please
ensure that you also pass on all the documentation
with it.

Intended use

The Ultimate Speed ULGD 3.8 A1 is a multi-stage
car battery charger that is suitable for charging
and trickle charging up of 6 V or 12 V lead-acid
batteries (batteries) with electrolyte solution (WET),
electrolyte absorbent mats (AGM) or gel electrolyte
(GEL).
This appliance is not suitable for charging lithium-ion
batteries. The is not intended for commercial use
and is for indoor use only.
The manufacturer accepts no responsibility for
damage(s) arising out of usage contrary to the
instructions specified below.

Scope of delivery

1 Car battery charger ULGD 3.8 A1
1 Instructions for use

Parts description

See Figure A:
12 V / 0.8 A (Program 2)
12 V / 3.8 A (Program 3)
12 V / 3.8 A (Program 4)
6 V / 0.8 A (Program 1)
LED reverse connection
LED stand-by
Charge display
Condition display
■ 32 │ GB │ MT
Voltage display
Program selection button (MODE)
See Figure B:
Charger
Fastening eyelets
Mains lead
Positive pole clamp (red)
Negative pole clamp (black)
Positive pole connector cable (red)
Negative pole connector cable (black)

Technical Data

Rated voltage:
Rated power
consumption:
Rated output
DC voltage:
Rated output DC:
Fuse (internal):
Environmental
temperature:
Protection rating:
Protection class:
Battery types:

Safety

Safety instructions

WARNING!
► Read all safety warnings and all instructions.
Failure to follow the warnings and instruc-
tions may result in electric shock, fire and/or
serious injury.
This charger is suitable for indoor
use only.
220 - 240 V ∼ 50/60 Hz
(alternating current)
60 W
6 V / 12 V
(direct current)
0.8 A / 3.8 A
T2A
2 A
0°C bis 40°C
IP 65
II / (double shielded)
6 V lead acid battery
1.2 Ah - 14 Ah
12 V Lead acid battery
1.2 Ah - 120 Ah
ULGD 3.8 A1