Function Key Settings - Canon DR-5020 Manual De Instrucciones

Chapter 3 Preparing Documents

Function Key Settings

Four function keys are located at the top of the operation panel. These keys can
be used easily by one-touch operation on the operation panel by registering the
following items.
The following settings can be registered to the function keys:
• Manual Thickness Adjustment
Manually adjusts the paper thickness.
• Imprinter ON/OFF
Selects use of the imprinter when the optional imprinter is installed.
• Fixed Thickness Mode ON/OFF
Sets the paper thickness to a fixed thickness.
• Double Feed Detection ON/OFF
Automatically detects simultaneous feed of two or more documents during
scanning.
• Restore Memorized Setting ON/OFF
Registers the scanner settings that are set on the personal computer to the
function keys. Once settings are registered, they can be restored to the scanner
simply by pressing a function key.
Functions are registered to function keys in the application. For details on how to
register settings to function keys, refer to the "ISIS/TWAIN Driver Instructions" or
"Scanning Utility 5000 Instructions".
• Default settings are as follows:
Function key 1: Manual Thickness Adjustment
MEMO
Function key 2: Imprinter ON/OFF (when this option is installed)
Function key 3: Fixed Thickness Mode ON/OFF
Function key 4: Double Feed Detection ON/OFF
• Details of functions registered to each function key are saved on the scanner. Note
that these details will revert to their defaults if the scanner is submitted for repair.
60
1
Function Key 1
3
Function Key 3
2
Function Key 2
4
Function Key 4