HP Latex 700 Serie Información De Introducción página 9

If the printer is left idle for some time, it goes into sleep mode and switches off the front-
panel display. To change the time that elapses before sleep mode, tap , then Setup > Front
panel options > Sleep mode wait time. You can set a time between 5 and 240 minutes; the
default is 30 minutes.
The printer wakes from sleep mode and switches on the front-panel display whenever
there is some external interaction with it.
Front-panel error codes
The system may occasionally display a system error consisting of a 12 digit numerical
code followed by the recommended action to take.
In most cases you will be asked to restart the printer because it can diagnose the issue
better and may be able to fix it automatically. If the problem persists after the restart,
contact your support representative and be ready to give the error message numerical
code. If the error message contains another recommended action, follow the instructions
given.
Specifications
Specifications for all printer models.
Table 1 Power specifications
Number of power cords
Input voltage
Input frequency
ENWW
View information about the job that is
currently printing.
Optimize print quality, access test plots
and maintenance routines, find
solutions for image problems.
View information about the printer.
View and change printer settings in
general.
HP Latex 700 series
200–240 V (two wires and protective earth)
50 / 60 Hz
View ink-supply status and perform ink-
cartridge and printhead operations.
View network and Internet status and
change related settings.
Get help from the user guide.
HP Latex 800 series
2
Front-panel error codes
7