Scott ON ROAD Manual Del Usuario página 5

Minimum requirements of resistance to impact abrasion (in seconds)
IMPACT ABRASION RESISTANCE
(PALM FACE / ALL LAYERS)
SINGLE ABRASION TIME
MEAN ABRASION TIME
Minimum requirements of impact attenuation
IMPACT ATTENUATION
RESISTANCE (KNUCKLE
PROTECTION / ALL LAYERS)
SINGLE RESULT
MEAN TRANSMITTED FORCE
• VII. HOW TO ADJUST YOUR SCOTT GLOVES
CHOOSING YOUR CORRECT SIZE
It must be chosen in reference to the size indicated in the size chart
on page 2 or on the garment itself. SCOTT Sports SA shall not
accept any complaints arising from the use of an incorrect fitted
SCOTT Gloves. Please bear in mind that a trial of the glove before
purchase is the best way to find the correct size of your glove.
SCOTT GLOVES POSITION AND FIT
For a SCOTT Glove to work properly, it must cover the protected area
correctly. The garment must have the correct size, chosen from the
manufacturer's size chart. SCOTT Gloves are designed to stay firm-
ly in contact with the hand. Straps and elastic bands should be fas-
tened tightly to guarantee stability of the SCOTT Gloves during use.
Check that all closure systems are securely closed. The SCOTT Gloves
should fit snugly but not too tight. For maximum protection and safe-
ty, the SCOTT Gloves should not cause any discomfort. Gloves should
be worn over or under the jacket sleeves so that the sleeves and cuff
overlap ; they must not slip off easily even in the event of an accident.
Wear, dirt or any kind of damage may compromise their efficiency.
ENGLISH - 8
Level 1 Level 2
≥ 3,0 s ≥ 6,0 s
≥ 4,0 s ≥ 8,0 s
Level 1 Level 2
optional mandatory
≤ 9,0 kN ≤ 5,0 kN
≤ 7,0 kN ≤ 4,0 kN
• VIII. CARE AND MAINTENANCE
STORAGE
Contamination with foreign substances and improper care can
seriously compromise the effectiveness of your SCOTT Gloves
and reduce its performance.
Do not store your product to direct sunlight.
Do not expose your SCOTT Gloves to extremely hot and cold tem-
peratures like those found in a closed car or outdoor storage.
Hang your gear dry and away from direct heat sources.
SCOTT recommends to store your gear at a temperature between
0 ° C and 30 ° C. The gear should be cleaned accurately before put-
ting it away for long periods.
SCOTT Sports SA shall not be liable for any damages and losses
due to improper storage.
CLEANING
Washing instructions are indicated on the SCOTT Gloves itself. Do
not bleach, iron or dry clean. Do not use hair dryers or other heat-
ers. Do not use solvents or toxic substances to clean it.
CHECKING
This product has a limited lifespan and for optimum safety SCOTT
recommends replacing your product three (3) years after purchas-
ing date. After heavy impact, resulting in damage to the product, it
is recommended to replace it. The protection they offer could be
reduced due to mechanical wear or improper use. Before use, please
check the SCOTT Gloves for any damage to the straps, stitching and
pads. Dispose of the product if you notice any damage.
DISPOSAL
Dispose of the products in the domestic waste. Do not mechanically
disrupt or incinerate the product. This may lead to potential hazards.
• IX. SALES & HOMOLOGATION
SALES
Responsible for the development and commercialization in the
EU and worldwide is :
SCOTT Sports SA, Route du Crochet 11, CH-1762 Givisiez.
Distribution USA :
SCOTT USA Inc., 651 West Critchlow Drive, 84404 Ogden, USA.
9 - ENGLISH