Kohler Vanity K-2435 Manual De Instrucciones página 9

3. Install the Legs
WARNING: Risk of personal injury. The vanity is heavy and
cumbersome to move. Obtain sufficient help to carefully lift
or move the vanity.
Remove the drawers from the vanity base. Refer to your model's
"Drawer" section contained in this guide for proper removal.
NOTE: Perform this procedure with two people.
NOTE: To protect the finished surface of the vanity, perform
assembly tasks on a flat, padded work surface.
Lay the vanity top down on a flat, padded surface.
Position one leg with the curved side facing the center of the
vanity.
Insert the studs on the legs through the mounting holes of the
base.
From the inside of the base of the vanity, slide a washer and nut
onto the studs.
Kohler Co.
Stud
Mounting Holes
Washer
Nut
9
Washer
Nut
1059700-2-B