Installation - Glacier bay HD67540-1008D2 Guía De Instalación Y Cuidado

Installation

1
Installing the faucet assembly
CAUTION: Always shut off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
NOTE: This step is for no escutcheon installation (optional).
If the escutcheon will be used, install the faucet assembly
as described in step 2.
□
Shut off the water supply.
□
Install the faucet assembly (A)-including outlet
tube (1), hose (2), supply hose (3), supply
hose (4), outlet tube (5) and sensor cable (6)
-through the hole in the sink in sequence.
A
5
6
3
4
2
1
2
Installing the faucet assembly
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
□
Place the escutcheon (D) and the gasket (E) on
the bottom of the new faucet assembly (A).
□
Install the faucet assembly (A)-including outlet
tube (1), hose (2), supply hose (3), supply
hose (4), outlet tube (5) and sensor cable (6)
-through the hole in the escutcheon (D) in
sequence.
NOTE: Silicone sealant is required under the gasket (E).
6
A
D
E
5
6
3
4
2
1