Glacier bay HD67540-1008D2 Guía De Instalación Y Cuidado página 7

Installation (continued)
3
Securing the faucet assembly
□
From underneath the sink, secure the faucet
assembly to the sink with the FastMount™
system (B). The FastMount™ system (B) through
the outlet tube (1), hose (2), supply hose (3),
supply hose (4), outlet tube (5) and sensor
cable (6) in sequence. Push the FastMount™
system (B) up over the threads until it stops
against the bottom of the sink, then hand turn
(clockwise) to tighten (Fig 1).
6
3
2
Push
Sink
1 1
up
B
Continue to push up
and turn clockwise
to tighten
5
4
1
B
Push
2
B
up
3 3
Sink
B
Fig 1
4
Attaching the quick connector
to the receiving block
□
Push the quick connector (C) with the blue tab
firmly upward and attach it to the receiving
block (1) with blue. Pull down moderately to
ensure the connection has been made. If it is
necessary to remove the quick connector (C),
squeeze the tabs on the quick connector (C)
and then pull down to disconnect.
Blue
Sink
7
Please contact 1-855-HD-GLACIER for further assistance.
1
C
HOMEDEPOT.COM/GLACIERBAY