Operation; Troubleshooting; Specifications - Steren CLK-910 Manual De Instrucciones

6. OPERATION

Once a user is registered, simply place the finger on the Fingerprint reader for 2
seconds, pass a target or enter the assigned code.
The records of entry and exit are automatically generated. The green LED (on
the top of the CLK) turn on when the detection of the finger is correct.

7. TROUBLESHOOTING

The device does
not turn on
The device does not
register fingerprints /
RFID cards
Data stored on
the device cannot
be downloaded to
computer

8. SPECIFICATIONS

Input:
Voltage converter:
Input:
Output:
Product design and specifications are subject to change, without notice.
28
•Check connections.
•Check that the power outlet to which device is
connected is powered.
•Make sure that the user is registered on the system.
•Check that the user´s finger is the same which was
registered.
•Pass the card over the specified area.
•Make sure
both to the time clock and to the computer.
•Insert a SD card and download the data to it.
•Connect the
5V - - - 1A
100-240 V~ 50/60Hz 500mA
5V - - - 1A
the USB cable
equipment to
is connected
the network.