Frequently Asked Questions - Corsair HYDRO X Serie Guia De Inicio Rapido

CONNECTING THE WATER BLOCK RGB LIGHTING TO THE MOTHERBOARD
BRANCHEMENT DE L'ÉCLAIRAGE RGB DU BLOC À EAU À LA CARTE MÈRE • ANSCHLIESSEN DER RGB-WASSERBLOCK-
BELEUCHTUNG AN DAS MOTHERBOARD • COLLEGAMENTO DELL'ILLUMINAZIONE RGB DEL WATER BLOCK ALLA SCHEDA
MADRE • CONEXIÓN DE LA ILUMINACION RGB DEL BLOQUE DE AGUA A LA PLACA BASE • ПРИСОЕДИНЕНИЕ RGB-
ПОДСВЕТКИ ВОДОБЛОКА К МАТЕРИНСКОЙ ПЛАТЕ
Connect the XC9 RGB male connector into the RGB
•
ADAPTER CABLE female connector (Figure 1).
Connect the RGB ADAPTER CABLE female connector into
•
the Digital RGB header on the motherboard. Make sure the
arrow on the RGB ADAPTER CABLE is plugged into +5V on
the motherboard (Figure 2).
By using the motherboard adapter it is not possible to control the
RGB illumination with iCUE software.
Branchez le connecteur mâle du bloc XC9 RGB au connecteur
•
femelle du CÂBLE D'ADAPTATEUR RGB (Figure 1).
Branchez le connecteur femelle du CÂBLE D'ADAPTATEUR
•
RGB à la prise numérique RGB sur la carte mère. Assurez-
vous que la flèche figurant sur le CÂBLE D'ADAPTATEUR RGB
est branchée à +5 V sur la carte mère (Figure 2).
En utilisant l'adaptateur de carte mère, il n'est pas possible de
contrôler l'éclairage RVB avec le logiciel iCUE.
• Verbinden Sie den XC9-RGB-Stecker mit der RGB-
ADAPTERKABEL-Buchse (Abbildung 1).
Verbinden Sie die Buchse des RGB-ADAPTERKABELS mit
•
dem digitalen RGB-Header auf dem Motherboard. Stellen Sie
sicher, dass das RGB-ADAPTERKABEL mit dem Pfeil an + 5V
auf dem Motherboard angeschlossen ist (Abbildung 2).
Mit dem Motherboard-Adapter kann die RGB-Beleuchtung nicht
mit der iCUE-Software gesteuert werden.
Figure 1
RGB ADAPTER CABLE
XC9 RGB
Collegare il connettore maschio dell'unità XC9 RGB al
•
connettore femmina del CAVO ADATTATORE RGB (Figura 1).
Collegare il connettore femmina del CAVO ADATTATORE
•
RGB al collettore RGB digitale sulla scheda madre. Accertarsi
di collegare la freccia sul CAVO ADATTATORE RGB all'uscita
+5 V sulla scheda madre (Figura 2).
Utilizzando l'adattatore della scheda madre non è possibile
controllare l'illuminazione RGB con il software iCUE.
Conecte el conector macho del XC9 RGB al conector hembra
•
del CABLE ADAPTADOR RGB (figura 1).
Conecte el conector hembra del CABLE ADAPTADOR RGB
•
a la cabecera digital RGB en la placa base. Asegúrese de que
la flecha del CABLE ADAPTADOR RGB esté enchufada a +5 V
en la placa base (figura 2).
Al usar el adaptador de la placa base no es posible controlar la
iluminación RGB con el software iCUE.
• Присоедините штекерный разъём XC9 RGB к гнездовому
разъему КАБЕЛЯ АДАПТЕРА RGB (рис. 1).
Присоедините гнездовой разъём КАБЕЛЯ АДАПТЕРА RGB к
•
разъему Digital RGB на материнской плате. Проверьте,
что стрелка на КАБЕЛЕ АДАПТЕРА RGB подключена к +5B на
материнской плате. (рис. 2).
Посредством адаптера материнской платы невозможно управлять
освещением RGB с помощью программного обеспечения iCUE.
Figure 2
C
C
19

FREQUENTLY ASKED QUESTIONS

FOIRE AUX QUESTIONS • HÄUFIG GESTELLTE FRAGEN • DOMANDE FREQUENTI •
PREGUNTAS MÁS FRECUENTES • ЧАСТО ЗАДАВАЕМЫЕ ВОПРОСЫ
1. Is this XC9 RGB Water Block compatible with
my motherboard?
The product supports most of the LGA-2066 and sTRX4
motherboards on the market. Please consult corsair.com for
an up-to-date list of unsupported models prior to installation!
2. Is this XC9 RGB Water Block compatible with older
Intel platforms?
®
Yes, the XC9 RGB is physically compatible with older Intel
socket types, such as LGA-2011 and -2011-3.
3. Can I use the XC9 RGB as a standalone part?
No, this is a water-cooling water block for your CPU which
requires a complete custom water-cooling system, including
standalone pump and radiator. For more information, please
visit corsair.com.
4. Can I use the XC9 RGB with aluminium
water-cooling equipment?
No, you cannot. The cold plate is made from nickel-plated
copper and should not be mixed with aluminium.
5. I s the flow direction important?
Yes, it is. XC9 RGB works best with coolant entering via the
labelled INLET port. However, the product will operate with
reversed flow direction, albeit with reduced performance.
6. Can I reuse the pre-applied thermal paste on the XC9 RGB
Water Block for re-installation?
Re-installation of the XC9 RGB Water Block will require you
clean off the pre-applied thermal paste and apply a new layer of
thermal paste.
7. Can I connect the RGB header directly to my motherboard?
Yes, you can – using the included RGB ADAPTER CABLE. See
page 19 - CONNECTING THE WATER BLOCK RGB LIGHTING
®
TO THE MOTHERBOARD.
8. How many RGB devices can I daisy-chain to a single
channel on a CORSAIR controller?
CORSAIR recommends you connect no more than three (3)
Hydro X Series RGB devices of any type connected in a series
on a single channel.
However, you can connect one (1) XC9/XC9 water block, two
(2) XG7 RGB water blocks and one (1) XD5 RGB pump unit for a
total of four (4) devices.
Please note that due to the absence of a daisy chain connector,
the XC9 RGB should be the last link in the chain.
Do not mix CORSAIR fans or RGB LED strips and CORSAIR
HYDRO X products on the same channel on the controller.
Use a dedicated channel for other components.
20