1 1
1. Lock the two buckle parts together (Figure 1)
2. To secure the harness, put the locked parts into the buckle
until you hear a "click" (Figure 2)
3. Check the harness is secure by pulling the shoulder straps
(Figure 3)
4. Tighten the harness by pulling the adjuster strap. Straps must
be secure. It is recommended the distance between the strap
and the child's shoulder is one finger width. Straps must not be
loose (Figure 4)
5. To loosen the harness straps, press the button under the cloth
cover and at the same time pull the two shoulder straps upwards
(Figure 5)
6. To release the harness, press the red button on the buckle and
remove the child from the seat.
Using the Harness
2 2
4 4
V.01.21
3 3
click!
5 5
5