Place the infant car seat rearward-facing on the vehicle seat and
1.
ensure that it is close to the backrest (Figure 1)
Feed the lap strap of the seat belt through the slots in the infant car
2.
seat and insert the latch of the seat belt into its buckle (Figure 2)
Feed the shoulder strap of the seat belt through the slot in the back
3.
of infant car seat, behind the headrest (Figure 3)
Ensure that the vehicle seatbelt is tightened and make sure that it is
4.
not twisted or knotted. Adjust the handle to the forward position so
that it contacts the backrest (Figure 4)
Do not use any other connection points than those marked
Installing the Car Seat
1
3
WARNING!
V.01.21
2
4
8