Philips GoPure Car GP6201 Manual De Usuario página 6

3 How to install Philips GoPure car air purifier in your car
3.1 Installation-placing under the car seat (recommended position)
1. Remove liner from the
hook fastener. Avoid
touching the adhesive side.
2. Paste the 2 strips hook
fastener at the bottom of
the device.
Important :
It is recommended to remove
any surface contaminants
that may reduce adhesion.
Isopropyl alcohol is a good
general use solvent for
cleaning contaminants from
surfaces for example.
3. Plug in power adaptor to a
12V outlet in your car. Route
the cable under your seat
to the back. Keep the cable
away from seat rails.
m Warning
For your safety, never
position the device under
the seat by sliding it from the
front of the seat.
Always slide it underneath
from the back of the seat.
6
4. Connect power cable
to device and place it
underneath the car seat from
the back.
5. Press down the device for
better attachment with
the carpet.