Philips GoPure Car GP6201 Manual De Usuario página 8

4 Using GoPure car air purifier functions
When the vehicle power supply is on, the device starts automatically in auto mode.
1 To turn on the device, touch the power button, the device will start running
2 Touch the power button to switch the speed mode in sequence of auto,
3 To turn off the device, hold down the power button for 2s until it emits
2s
The air quality indicatorr shows the air quality inside your car at all times.
Red
Yellow
Blue
After the device is turned on, filter replacement
reminder indicator will flash red.
5 Philips GoPure car air purifier-How filter works
Philips GoPure Car air purifier is
composed of a multi-layer filtration
system that guarantees the most
effective air-purification. All filter
layers are assembled in one single
simple-to-replace filter.
m Important
Philips GoPure car air purifier
indicates automatically when you
must change the filters.
in auto mode with emitting a sound.
boost and silent. The power button will emit a sound while being pressed.
a sound.
>80 ug/m 3
41-80 ug/m 3
0-40 ug/m 3
When the filter needs to be
replaced, the filter replacement
indicator will flash red for 30
seconds then remain red each time
the device is turned on.
Replace the filter immediately
using only genuine Philips GoPure
SelectFilter Plus.
It helps maintain the maximal
performance of your GoPure Car
air purifier and helps to provide the
purest air quality inside your car.
Unhealthy air quality
Good air quality
1 Disconnect GoPure car air
purifier device.
8
Fair air quality
Replace filter