Philips GoPure Car GP6201 Manual De Usuario página 9

High air purification power
Product air cleaning performance
Target pollutant *
Particles
Formaldehyde
Toluene
TVOC
NO2
SO2
Noise * (Sound power level)
Birch pollen removal **
* Complying with GB/T18801-2015, tested in 3m
** Airmid certified SelectFilter removes upto 90% airborne birch pollens
2 Push the front side of cover.
take off top cover .
3 Remove the old filter
as shown.
4 Using the groove,insert a new
original GoPure filter.
m Important
The filter slides in only one way,
do not force it in.
See above.
Clean air delivery
rate (CADR)
20m 3 /h
6.5m 3 /h
9.5m 3 /h
13m 3 /h
16m 3 /h
14m 3 /h
chamber
3
5.2 How to restart GoPure car air purifier after
a filter replacement
m Important
You must reset
the Philips GoPure device after
every filter replacement.
To reset your device after
replacing the filter:
1 Plug the device into the power
supply and ensure that it is
turned off.
2 Touch and hold the power
button over 3s until it emits a sound,
the filter replacement indicator is
blinking in red for 15s, filter reset
done once indicator turns off.
9
Cleaning energy
efficiency grade
High efficiency
High efficiency
High efficiency
High efficiency
High efficiency
High efficiency
55dB(A)
90%
3 Car air purifier purifier operates
in the normal mode once top cover
is locked.
4 Repeat the above steps if the
filter reset fails.
m Important
For you safety,
GoPure car air purifier will shut down
automatically whenever you open the
top cover.