Kohler K-T314 Instrucciones Para La Instalación página 9

Back off the setscrews in the sleeve, and with a twisting
motion install the sleeve on the spout supply tube until it
contacts the washer surface.
Align the sleeve so the setscrews are not facing directly
forward or backward.
Tighten the setscrews.
When supplied, position the ring over the sleeve so it rests
upon the washer.
Apply a ring of plumbers putty or other sealant around the
underside of the spout according to the putty
manufacturer's instructions.
CAUTION: Risk of product damage. Use care
when installing the spout assembly to prevent
damage to the O-ring seal on the sleeve.
Install the spout assembly onto the sleeve, and carefully
press down until the spout base contacts the deck, rim, or
tile.
Align the spout as desired, and tighten the setscrew.
If included, press the plug button into the setscrew hole.
Kohler Co., Kohler, WI U.S.A.
Sleeve
Spout
Apply Plumbers Putty
Plug
Button
Setscrew
9
Setscrew
Setscrew
Fig. #18
Fig. #19
Î
Fig. #20
1012557-2-
Î
A