blum HF-SD-01 Instrucciones De Montaje página 79

Operation
Activating synchronisation
C
1
2
3
4
5
Lights up continuously
Up to three drive units can be synchronised allowing them to move
simultaneously. This function is required for several cabinets with a
uniform front.
Activating the SERVO-DRIVE switch → see A 1–3.
Press the <SYNC> button for the first drive unit
until the LED flashes green.
Press the <SYNC> button for the second drive unit
unit the LEDs of both synchronised drive units light up green.
Repeat procedure C 2–3 for all additional drive units.
Carry out reference run → see B 1–4.
NOTE
If there is an activation error, reset all drive units
→ see Reset wireless F 1.
Re-activate the SERVO-DRIVE switch, synchronisation and the refer-
ence run → see A 1–3, C 2–4 and B 1–4.
EN
Flashes
79