KTM Power Parts 60707947033 Instrucciones De Montaje página 6

6
- Position rear cover (not included).
- Mount original screws and tighten.
- Position back plate with grab handles.
- Mount the original screws
- Position the heating switch on the right grab handle.
- Mount and tighten screws
- Plug in plug for the heater switch.
- Plug in plug for the passenger seat heating into the heatable
passenger seat (not included).
- Install the passenger seat (see the Owner's Manual).
Route the cable properly and secure with a cable tie.
Ensure that the cables are not kinked or pinched. Check the
cable routing to ensure that there is no chafi ng.
and tighten to 25 Nm.
(included).