Cuisinart CPK18E Instrucciones página 12

95°C
85°C
On/Off Switch
95°C
Temperature selector: 6 temperatures (75°C, 80°C, 85°C, 90°C, 95°C and 100°C).
Keep Warm Button
Cover release button
B. Operation
Heating water
• Open the cover by pressing the button
• Pour the desired amount of cold water in the kettle ensuring to keep between the "MIN" and
"MAX" levels marked on the water gauge.
• Push the lid closed; you will feel and hear a slight «click».
• Gently place the kettle on the base.
• Plug the kettle into the mains.
• Press the button of the desired temperature.
• Press the button
level indicator at the rear of the kettle will turn on. An audio signal will sound for 1 second to
indicate that the process has begun.
N.B. If the switch is pressed but the temperature has not been set, the kettle will default to
100°C.
• When the kettle has reached the selected temperature it will beep 5 times and switch off. The
light illuminating the water indicator window will turn off.
• The kettle can also be turned off at any time by pressing the button or by removing it from
the base.
N.B. The temperature can be changed at any time during the boiling process by pressing one
of the preset temperature options. If the temperature selected during boiling is lower than
the temperature of the water in the kettle or the kettle is off and the water is still hotter than
the temperature selected, the temperature button will flash, and the kettle will switch off and
beep 5 times once the water temperature drop to the selected temperature. If the temperature
selected during boiling is same as the temperature of the water in the kettle, it will switch off
and beep 5 times. When the kettle is off, select a temperature and then press On/Off switch, if
the temperature of the water in the kettle is the same as the selected temperature, the kettle
will not work but beep 5 times.
• Once the water has boiled and the kettle has switched off, carefully lift the kettle off the
powerbase.
• When the kettle is removed from the powerbase before it automatically switches off and is
then put back on the powerbase it will not continue to boil. It will need to be reset.
100°C
90°C
75°C
: used to turn the kettle on and off.
100°C
85°C
95°C
: maintains the water temperature for 30 minutes.
: to open the cover.
to heat the water. The temperature button selected will flash. The water
80°C
90°C
100°C
.
10