Honeywell COMFORT TEMP 4 HCE640 Serie Manual Del Usuario página 4

Calefactor de cerámica
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

• To select a heat setting, press ( ). There are 4 comfort settings available to choose from - Gentle Warmth,
Cozy, Toasty, Heat Blast - with each setting designed to provide both a unique heat and sound level based on
your desired needs.
NOTE: see next section for an overview of each of the heat settings.
• Press the Timer Button ( ) to select 1, 2, 4, or 6 hour setting. The heater will run for that chosen period in the
selected setting/mode, counting down the hours and automatically shutting the heater off after the selected
time has passed.
• The ComfortTemp™ 4 Ceramic Heater has an oscillation feature. Press the Oscillate Button (
or off the oscillation function.
• To shut the heater off, press the Power Button ( ) and the heater will begin Powering Down. The heater will
shut off after counting down 10 seconds to cool down the internal components.
• It is important to allow the heater to run through the cool down phase. DO NOT unplug the heater until it has
completed the cool down phase.
4 COMFORT SETTINGS THAT YOU ADJUST TO YOUR NEEDS
Once your heater is ON, use the heat setting control button ( )
on the front panel to select the desired heat setting for your needs.
Your heater will start on the highest setting (Heat Blast) each time
you turn on the heater. Below is a handy reference to help select
the heat option that best suits your desired comfort level. (Fig. 3)
GENTLE WARMTH – (LOW HEAT)
This setting provides a soft, more personal touch of warmth.
COZY – (MEDIUM HEAT)
Ideal for personal and small areas, this setting slightly steps up
the heat output for soothing, comforting heat.
TOASTY – (MODERATE-HIGH HEAT)
Gradually increasing the heat level, this setting is perfect for
creating that comforting room environment.
HEAT BLAST – (HIGH HEAT)
Choose this maximum heat setting to quickly remove chill and deliver comforting, quick heat.
SAFEGUARD® AUTO SHUT-OFF FEATURE
The Honeywell ComfortTemp™ 4 Ceramic Heater is enhanced with a SafeGuard® Auto Shut-Off feature. This
innovative feature is designed to automatically shut the heater off after 8 hours of continuous use and provides
an extra layer of protection for peace-of-mind.
How it works: By default, the ComfortTemp™ 4 Ceramic Heater comes with the Auto Shut-Off feature engaged.
If you chose to operate the heater in the Auto Shut-Off mode (
hours every time the heater is used, unless the heater is turned off prior to the 8 hour auto-off time. All features
are functional while operating in the Auto Shut-Off feature. If you choose to disengage this feature, the unit will
operate in the Continuous heat mode (
• Press the SafeGuard® Auto Shut-Off switch on the
back of the unit (Fig. 4) to select either the Auto Shut-
Off or Continuous heating modes. The corresponding
icon will illuminate on the controls to indicate which
mode you are in.
), the heater will shut off automatically after 8
) .
Fig. 4
4
Fig. 3
SafeGuard® Auto Shut-Off
) to turn on
Heat
Setting

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Comfort temp 4 hce643 serieComfort temp 4 hce645 serie

Tabla de contenido