Operating Functions - Tamerica TPI-4900E Manual De Usuario

Operating Functions

1 Control Panel
2 Safety Sensor
3 Blade
4 Cutting Stick
5 Cut Switch
6 Hand Wheel
1. Control Panel — use the touch screen to input cut sizes and make other programming adjust
ments
2. Safety Sensors (12) — help keep the user safe from accidents by preventing the machine from
operating when one (or more) of them is blocked
3. Blade — operated by way of pressing the cut switch (1 on the left and 1 on the right)
4. Cutting Stick — helps prolong the life of the blade
5. Cut Switch (2) — press simultaneously to operate the blade
6. Hand Wheel — to manually adjust cut size in small increments (fine-tuning)
7. Back Gauge — helps align the paper and can be programmed to automatically push the paper
out after the cutting process
8. Sensor Bypass — to turn off the 3 sensors on both sides when the document being cut extends
beyond the feed tray. All other sensors will continue to function.
9. Paper Clamp Up/Down — for manual operation of paper clamp. Can also be controlled from
the touch screen (control panel).
10. Emergency Stop — to abruptly stop the cutter from working in the event of an emergency
- 5 -
7 Back Gauge
8 Sensor Bypass
9 Paper Clamp Up/Down
10 Emergency Stop