Product Description; Foreword; Notice; Supplied Accessories - Tenveo 3U Manual De Usuario

Product Description

1.Foreword

Thanks for choosing our NV series conference cameras. Please read this manual carefully before using the product.

2.Notice

·To avoid damage from stress, violent vibration, soaking during transportation, storage and installation.
·Take care of each components of camera during installation, and install camera at where is affordable enough, to avoid drop
or scratches of camera case.
·Handle the camera parts gently, do not squeeze the camera units hard. Please do not touch the camera lens by hand
directly to avoid the lens scratched and image quality affected.
·Do not apply excessive voltage. (Use only the specified voltage) Otherwise, you may get an electric shock or a fire occur.
·Do not aim the camera at the sun or the other high luminous objects,otherwise it may cause image blurring or lens flare,
even cause permanent damage to the camera.
·Do not clean camera with active chemical or corrosive detergents, and remove dust or dirt on the surface of the lens with a
blower (Commercially available)
·Do not disassemble any camera components, in case of abnormal operation; contact your authorized dealer or the store
where you purchased the product.

3.Supplied accessories

(1) HD conference camera
(5) Manual

Performance Characteristics

1.Tech parameters

Electric
Input Voltage
Power
Decoder
Operation
Horizontal Rotation
Vertical Rotation
Rotation Speed
Physics
Preset Point: 9 for remote
Preset Point control,255 for PELCO,
64 for VISCA.
Net-Weight
(2) DC12V power supply
(6) Remote control
DC12V Baud
12W Protocol
Internal Address Set
±175° Operating Environment
90°
Operating Temp
100°/s
Support desktop,wall mount,ceiling mount and tripod installation
1.46kg
(3) Ceiling mount
(7) USB cable
Communication
VISCA/PELCO-D/PELCO-P
Surroundings
Installation Method
1
(4) Mounting screws
9600/38400bps
0~64
0°~+50°
0~95%
non-condensing