Publicidad
Idiomas disponibles
Idiomas disponibles
WARRANTY
The product warranty for
ONEMATIC
This warranty does not cover damage due to inadequate installation or manipulation.
RECOMMENDATIONS
Please read this manual carefully before installation.
Do not dispose of this manual afer installation. It might be useful for future reference in case of modificationsor for troubleshooting regarding
the different types of alerts.
Hydraulic and electrical installations must be set up by qualified personnel according to the safety provisions as well as the standards and
legislation of each country.
It is recommended to use a 10 A motor protection switch (3-pole interlocked for three-phase units).
The unit must be operated with clean water. In case gravel or small particles (facilities with submersible pumps) might occur, it is
recommended to use a filter to avoid possible blocking of the flow sensor.
ONEMATIC should be used only for the transport of clean water. It cannot be used for transport of other kinds of liquid.
It is recommended to use an accumulator in order to avoid continuous start-stops due to the deterioration of taps, valves, and also to prevent
"water hammer" in installations with valves of wide diameter.
WARNING, before performing any maintenance work inside the unit, it must be disconnected from the electric supply.
"CE" STAMENT OF COMPLIANCE.
We state, on our's own responsibility, thal all materials herewith related comply with the following European standards:
2006/95/EC Low Voltage Directive.
2004/108/EC Electromagnetic Compatibility.
2002/95/EC RoHS Directive
Product's name: U470306
Type: ONEMATIC
As per the European Standards:
IEC 60730-1:1993+A1:1994
EN 60730-1:1995+CORRIG:1997+A11:1996+A12:1996+A1:1997+A2:1998+A14:1998+A15:1998+A16:1999+A17:2000+A18:2003
UNE EN 60730-1:1998+A11:1998+A12:1998+A1:1998+A2:1998+A14:1998+A15:1998+A16:1999+A17:2001+A18:2003+CORRIG:2007
IEC 60730-1-6:1991+A1:1994
UNE EN 60730-2-6:1997+A1:1998+A2:1999+A2+CORRIG.2001
EN 60730-2-6:1995+A1:1997+A2:1998
EN 61000-6-2 (2005)
EN 61000-6-3 (2007)
Tehnical director
F. Roldán Cazorla
COELBO CONTROL SYSTEM, S.L.
is valid for the first 2 years after the manufacturing date.
EN
E
N
7
Publicidad
