Operation Procedure - 4CR 9800 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 13
9800 Ozone Sanitizer
EN
While the red indicator (11) is on, no one should be in the room where the device works. 
ABOUT OZONE
Ozone - О
, triatomic allotropic modification of oxygen. It has a characteristic smell (after
3
storm air). Ozone is the best disinfectant among all widely used means in the world for
removal of germs, bacteria and viruses. Its high oxidizing ability makes it the most effective
(after fluorine, which is toxic) and stronger than traditional cleaning agents. Ozone is widely
used for sterilization of medical items, for disinfecting premises and clothing, for purifying
water and air of microorganisms.
 
Advantages of ozonation:
• Ozone destroys all known microorganisms: viruses, bacteria, fungi, algae, their spores,
protozoa cysts, etc.
• There are no ozone-resistant forms of microbes.
• Ozone destroys known microorganisms 300–3000 times faster than any other disinfectant.
• Ozone acts very quickly - within seconds.
• Ozone has the maximum penetrating power.
• Residual ozone quickly turns into oxygen.
The only way to get rid of any odors once and for all is to disinfect the cabin with ozone. 

OPERATION PROCEDURE

1. Connect the power cable to the connector (2).
2. Connect the power cable to an electrical outlet, making sure that this outlet is protected by
a circuit breaker and has a reliable independent grounding.
3. Turn on the device using the power switch (1).
4. After the power is turned on, the device performs self-diagnostics and preparation for work.
5. The display (6) sequentially informs about the device name, its serial number, as well as the
number of cycles performed and the total operating time.
6. After the end of the internal diagnostics, the display (6) will offer to select a treatment
program.
7. The device has three treatment programs. Depending on the volume of the room being
processed, it is necessary to choose one of the proposed programs by pressing the buttons
(7, 8, 9):
• CAR program - cars and rooms up to 10 m3.
• VAN program - large SUVs, vans and rooms up to 25 m3.
• TRAILER program - large vans, minibuses, trailers and rooms up to 50 m3.
8. Then press START button (10). The device begins to produce ozone, as indicated by a
glowing red indicator (11). The display shows the selected program and the countdown of the
treatment time.
9. Turn off the device using the power switch (1) after the treatment program is completed.
9

Publicidad

Tabla de contenido
loading

Tabla de contenido