senya SYBF-CM008 Manual De Instrucciones página 25

Cold coffee
The pump is too noisy
Light coffee
Coffee color is too
dark
The handle can't
rotate to the locking
position
No water come out
from the pump
Steam cannot froth.
added and the handle could not
be switched to the right place.
The indicator light is not on
Coffee machine is not preheated
Coffee cup is not preheated
Without water in water tank
Mount the water tank in wrong
way
Coffee powder is not pressed flat
enough
Not enough coffee powder
Coffee powder is too coarse
Coffee powder is pressed too
tight
Too much coffee powder
The filter is clogged
Coffee powder is too fine
Water outlet is clogged
Too much coffee powder
Can't Rotate in place even
without coffee powder putted
Water tank is not in place
Air pump(have air in tube )
The steam indicator is not
illuminated.
The container is too big or the
shape not fits.
You have used skimmed milk
Steam outlet is clogged
service center.
Operation when the indicator light is
on
Please preheat the coffee machine
Please preheat the coffee cup
Please pour water into water tank
Please mount water tank in right
way
Please press coffee powder to flat
again
Please add coffee powder
Please use dedicated Espresso coffee
powder
Please press the coffee power with
strength of 3.3 pounds (about 1.5kg)
Please reduce coffee powder
Please clean the filter cup
Please use right coffee powder
Please clean the water outlet
Please reduce coffee powder
Please contact the authorized
service center
Please put water tank in place
When the pump working,open the
knob,let out appropriate amount of
water
Only after the steam indicator is
illuminated, the steam can be used
to froth.
Use high and narrow container.
Use whole milk or half-skimmed milk
Please clean the steam outlet by
using clip
24