Test Data - Angelo Po 0G0PEVTR Instrucciones Del Aparato

1.3 Side-by-side configurations
Appliances in side-by-side configurations can be secured as follows:
• Position the appliances side by side and ensure perfect levelling of surfaces;
• Loosen the control panel fixing screws and tilt down to remove.
• Secure the appliances by means of 6 MA screws and tighten fully down via the pre-drilled
holes.
N.B. : to improve finish and avoid penetration between the joints proceed as follows:
• After levelling, separate the appliances, protect the upper edge of the appliances with
adhesive tape and apply a bead of foodgrade sealant on the lateral edges of the tops.;
• Secure the appliances as specified above, trim the sealant and wait for it to polymerise before
removing the adhesive tape;
• Apply the sealant inside joint finishing A (part of kit KFP5 supplied on request) and
joint on the top .
2.1 Appliance dataplate
0000000
Mod
400 V 3N ~
230 V 3 ~
230 V 1N ~
9
9a
1 3
2
G M L ◗ G ◗ G M L G M L G M L ◗ G
ZN2N
A Hz kW
A Hz kW
A Hz kW
10 11
9d
9b 9c
1) Model
2) Personalisation
3) Manufacturer
4) Isulation rating
5) Year of manufacture
6) Serial no.
7) Protection rating
8) Country of destination
4
5
IIIIIIIIIIIIIIIIII I 98
12
1 3
9) Electrical data:
9a) Voltage
9b) Absorption
9c) Frequency
9d) Power
10) Test voltage indicator
11) Max. water pressure (*)
12) Water consumption (*)
13) Rotation speed (*)
14) Type of service
(*) = where required
- 2 -
1. Installation

2. Test data

6 7
987654321Ø IPX5
GB
A
cover the
GB
8
GB
1 4
1