Brake; Canopy; Bumper; Belt - Be Cool bi-baby Manual Del Usuario

EN
properly attached.
C.2 REMOVAL
While pressing the wheel release button, gently slide
the Rear Wheel out of the wheel housing.
D. BRAKE
D.1 Simply push the parking brake pedal down to
engage the brake.
D.2 Lift the parking brake pedal up to release the
brakes.
WARNING: Always apply the brakes whenever the
stroller is stationary. Never leave stroller unattended
on a hill or incline as the stroller may slider down
the hill.
E. CANOPY
E.1 Locate the Canopy mounting joint at the frame
28
of your stroller. Slide canopy attachment brackets to
attach to frame at both sides and the middle tube.
E.2 Fasten the flap onto the joint at the both side of
the handles as illustrated.
F. BUMPER
Assembly of Bumper: Press and hold the buttons
F.1
at both sides and insert the bumper bar into the
casing.
F.2 To remove the bumper: Press the buttons at both
sides and pull outward to remove the bumper.
G BELT
SAFETY HARNESS
G.1 Slide the grooved portion of the shoulder strap
clip onto the upper tongue of the waist strap.
G.2 Slide the shoulder strap and waist strap buckles