Spinel PINOCCHIO C Manual De Instrucciones página 13

In order to make cappuccino it is necessary to place the silicon pipe inside the milk container and
press the steam switch. Once the required amount has been made for a cappuccino, press the
switch again to stop.
Use the pipe clamp to adjust the amount of milk to be sucked from the container in order to
increase the temperature of the cappuccino.
To clean the internal circuit of the frother, place the silicon pipe into a glass full of water and
follow the Cappuccino procedures as above.
Cleaner
Frother
The Pinocchio CV model can be equipped with both a frother and a frother cleaner.
In order to make cappuccino it is necessary to place the chrome-plated end of the tube inside the
milk container and press the steam switch..
To clean the internal circuit of the frother, insert the chrome-plated end in to the frother cleaner
and operate the steam switch to flush through the inside of the frother.
Spinel S.r.l. 13