Disassembly And Replacement - Bosch Rexroth IMmtcp Manual Del Usuario

3 609 929 B65/2008-09 | IMmtcp
11

Disassembly and replacement

Required tools
• TX9 screwdriver
Disassembling
CAUTION
Disconnecting the IMmtcp
interface module while under
voltage
Damage to the IMmtcp interface
module!
y Make sure that the relevant
system components are not
under voltage before removing
the IMmtcp interface module.
Fig. 4: Releasing the lock
1 Lock
Proceed as follows to disassemble the
IMmtcp interface module:
1. Make sure the relevant system
components are not under voltage.
2. Loosen the front torx screws. The IMmtcp
interface module may only be removed
once the lock has been completely
released (see Fig. 4).
3. Assemble a dummy panel, if necessary.
1
Bosch Rexroth AG 23/76