Calibrating The Abl100; Maintaining And Cleaning The Abl100; Guarantee - Dometic WAECO MagicSafe ABL100 Manual Del Usuario

Calibrating the ABL100

8 Calibrating the ABL100
See fig. 8/fig. d
➤
Press down the brake pedal for 5 s.
✓
The system calibrates itself automatically.
➤
Test the system by pressing down the brake pedal again.
✓
The green LED of the control unit displays the system condition:
– The LED glows: the system has been set correctly.
– The LED flashes: the system has not been set correctly.
If the system has not been set correctly:
➤
Unscrew the control unit.
➤
Press the brake pedal and hold it down.
➤
With the wires attached, turn the control unit 180° around its own axis.
✓
The calibration is deleted.
✓
The LED goes out.
➤
Release the brake pedal.
➤
Turn the control unit over again.
➤
Fasten it in place again.
➤
Repeat the calibration.
9

Maintaining and cleaning the ABL100

NOTICE!
A
Do not use sharp or hard objects to clean the device as these may damage
the components.
10

Guarantee

The statutory warranty period applies. If the product is defective, please contact the
manufacturer's branch in your country (see the back of the instruction manual for the
addresses) or your retailer.
For repair and guarantee processing, please send the following items:
Defect components
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
12
MagicSafe ABL100