KTM Power Parts 93802984044 Manual De Instrucciones página 4

4
Scope of supply left-hand side
1x clutch lever guard
1x support for lever guard
1x collar bushing
1x handlebar frame slider
1x screw M6x40
1x bushing for hand guard
1x screw M4x10
Scope of supply right-hand side
1x brake lever guard
1x support for lever guard
1x collar bushing
1x handlebar frame slider
1x screw M6x40
1x bushing for hand guard
1x screw M4x10
Assembly
- Remove screw and vibration dampers on both ends of the handlebar.
- Preassemble the components of the brake lever guard (scope of
supply for the right-hand side) according to the scope of supply.
- Position it on the handlebar.
- Mount screw (included) and tighten to 10 Nm.
- Preassemble the components of the clutch lever guard (scope of
supply for the left-hand side) according to the scope of supply.
- Position it on the handlebar.
- Mount screw (included) and tighten to 10 Nm.
NOTE:
Set the guard rail so that it does not collide with the clutch lever or
brake lever when adjusting the handle width.
61313931220
61313932220