cecotec CONGA Manual De Instrucciones página 14

ENGLISH
5. Add water
Add water to water max. level (Fig. 7). Do not exceed the max level, or the water will spill out.
7
6. HEPA filter
Rotate the deposit cap anticlockwise to remove the lid.
Rotate the HEPA base anticlockwise in order to rimove the Hepa filter.
The HEPA filter must be cleaned regularly in order to keep a high suction power. Once removed
the filter, clean it with lukewarm water (no detergents). Once the filter is completely dry, rotate it
clockwise to set it. (Fig. 8)
8
7. Place the water deposit cap
Put the water deposit cap in the water deposit and rotate it clockwise to close (Fig. 9).
9
8. Safety clamp
Place the head unit and use the clips to lock the head by pushing them down (Fig. 10).
14 CONGA WET&DRY
05029_Conga Wet&Dry_Manual_GP_MV.indd 14 27/9/18 16:09