Overvie Of Commissioning And Configuration; Commissioning Process; Configuration Process; Establishing Connection To The Eschell - Schell 00 503 00 99 Manual Para La Puesta En Servicio Y La Configuración

Commissioning
Overvie of commissioning and configuration
1.4 Overvie of commissionin and confi uration
The follo ing procedure is recommended for commissioning and configura
tion of your eSCHELL

1.4.1 Commissioning process

Carry out the follo ing steps for commissioning:

– Establishing connection to the eSCHELL

– Entering individual pass ords
– Chec ing/ma ing general server settings
– Setting language
– Chec ing date and time, and if necessary setting them
– Configuring digital inputs of the eSCHELL
(GPIO)
– Commissioning the eSCHELL network
1.4.2 Confi uration process
After successful commissioning, configure the eSCHELL
server. The follo ing configuration steps are recommended for this:
– Identification of the fittings
– Detecting fittings
– Assigning names
– Grouping fittings (group management)
– Configuring hygiene functions
– Managing stagnation ush (creating, changing)
– Managing thermal disinfection (creating, changing)
– Creating cleaning stop (changing)
– Creating room layouts
– Setting parameters for the individual fittings
– Profile and user management
1.5 Establishing connection to the eSCHELL water management
server
» S itch on the po er supply for the eSCHELL 30
to start the eSCHELL
system.
1.5.1 Establishing connection via WLAN
Warning!
Warning about unauthorised access to the system by third
parties.
If the eSCHELL
is impossible from a technical perspective to rule out unauthorised
third parties gaining access to control of the system and initiating
flushes.
> Flushes hich are initiated
injuries in the form of scalds and damage to property.
ater management system.

ater management server

ater management server and to commission the
ater management system is operated via
ithout authorisation threaten physical
ater management server
ater management
bus po er supply unit
LAN, it
EN
137