Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Tahoe, Yukon, Full Size Blazer Chevy/GMC Pickup, Suburban,
1500 Series – All 2WD & 4WD, 2500 & 3500 Series – 4WD,
Receiver Shown In Proper Position
Equipment Required:
Fastener Kit: 01131-017
Wrenches: 10mm, 18mm, 7/8"
Drill Bits: 1/2"
1
Qty. (6)
Carriage Bolt, 1/2"-13 x 1-3/4"
2
Qty. (6)
Spacer, 1-1/2" x 2" x 1/4"
3
Qty. (6)
Conical Washer, 1/2"
* Use with optional OEM tow hook.
NOTE: If front mounted license plate is present, repositioning may be necessary.
1.
If present, remove lower fascia under bumper.
2.
If present, remove vehicle tow hooks.
3.
Feed the fasteners shown above through end of frame using pull wire.
4.
Raise hitch into position and attach fasteners and tow hooks as shown above.
5.
If large slot is not present, drill a 1/2" hole using the hitch as a template.
6.
If desired, trim and reinstall the lower fascia. CONSULT VEHICLE OWNER BEFORE TRIMMING.
Note: check hitch frequently, making sure all fasteners and ball are properly tightened. If hitch is removed, plug all holes in trunk pan or other body panels to
prevent entry of water and exhaust fumes. A hitch or ball which has been damaged should be removed and replaced. Observe safety precautions when working
beneath a vehicle and wear eye protection. Do not cut access or attachment holes with a torch.
This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5
and SAE J684.
z
2005 Cequent Towing Products
Front Mounted Receiver
Installation Instructions
2500 Series 2WD 7200 Lb. GVW With 6 Lug Wheels
Bumper
Lower Fascia
(Optional)
Tighten all 1/2" GR5 fasteners with torque wrench to 75 Lb.-Ft (102 N-m).
CARGO CAPACITY – DO NOT EXCEED
500 LB. OR VEHICLE FRONT GROSS
AXLE WEIGHT RATING. (GAWR)
9000
May Need To Be Drilled
On Some Vehicles
OEM Tow Hook
(Optional)
4
Qty. (6)
Nut, 1/2"
5
Qty. (4)
Carriage Bolt, 1/2"-13 x 2-1/2"
6
Qty. (2)
Pull Wire, 1/2"
Sheet 1 of 3
Part Numbers:
LB. MAX. WINCH LINE PULL
N65005
10-31-05
65005
Rev. A
Publicidad
Manuales relacionados para Cequent Towing Products 65005
Resumen de contenidos para Cequent Towing Products 65005
- Página 1 Do not cut access or attachment holes with a torch. This product complies with safety specifications and requirements for connecting devices and towing systems of the state of New York, V.E.S.C. Regulation V-5 and SAE J684. Sheet 1 of 3 N65005 10-31-05 Rev. A 2005 Cequent Towing Products...
- Página 2 Ce produit est conforme aux normes V-5 et SAE J684 de la V.E.S.C. (État de New York) concernant les spécifications en matière de sécurité des systèmes d’attelage. Feuille 2 de 3 N65005 10-31-05 Rev. A 2005 Cequent Towing Products...
- Página 3 Este producto cumple con las especificaciones y requisitos de seguridad para conectar dispositivos y sistemas de remolque del estado de Nueva York. V.E.S.C. Regulación V-5 y SAE J684 Hoja 3 de 3 N65005 10-31-05 Rev. A 2005 Cequent Towing Products...