Simon 1000-214-039 Serie Manual Del Usuario página 2

OPENING/CLOSING SENSOR IO
100
0x214-039
Technical characteristics
POWER SUPPLY BATTERY LIFE INDICATORS DIMENSIONS
x2 Main Body
2 YEARS
1 LED 75x28x18mm
AAA
under normal Magnet
1.5V
condition 75x12x18
*
* For more information on the EU
™
Declaration of Conformity and Z-Wave
frequencies, consult the product sheet on
our website simonelectric.com
INSTALLATION
1 The two parts of the sensor should be placed so that,
when the door/window is closed, they are within 10mm
of each other. By opening the door or window, the
sensor body and magnet should separate in proximity.
Max
10mm
The sensor should not be mounted directly on or near
metal framing or other large metallic objects since metal
objects may weaken the radio signal strength.
The sensor should only be placed indoors and away from
water and other extreme weather conditions.
2
There are two ways to install it:
Screw the bidirectional mounting plate and the magnet
A
onto the wall, door or window frame. Open the basepla-
te of the magnet with a screwdriver.
Attach the double-sided mounting tape to the covers
B
and attach to the wall, door or window frame.
ENGLISH
Ensure that the orientation marks of the sensor body and the magnet are oriented towards
3
each other.
4
Press the latch button to remove the cover from the sensor body.
Download the Simon iO application. After creating the installation, go to "Devices" and
5
click on add device, which can be found at the top right of the application.
5.1
Download the Simon iO application.
Press for three seconds on the inclusion button and the LED will blink intermittently. Then
6
close the cover.
Inclusion button
7
Close the cover.
Opening/Closing Sensor is used for detecting the opening or closing of doors and windows.
EVENT
Waking up
device
Pressing
the button
Add/
Removing
device from
Z-wave
Network
Pressing the
button
Reset
default
Latch
button
This is a Z-Wave Plus® Product using the latest S2 Security Encryption. This product can be operated
on any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-ba-
ttery operated nodes within the network will act as repeaters regardless of vendor to increase the
reliability of the network.
Z-WAVE DEVICE SPECIFICATION
Device Type
Generic Device Type
Specific Device Type
5.2
Go to "Devices" and click on add device.
Role Typ
Number of Groups
Max. devices in Group
Automatic reports
Number of Groups
Max. devices in Group
Actions
Supported Notification
Access Control (0x06)
Access Control (0x06)
Home security (0x07)
Tamper button
Wake Up - Wake Up Notification is transmitted:
- Once every 24h --> Wake_Up capabilities from 30min to 24h and default 24h.
- When user presses the button for 2sec<T<30sec and device is included.
85
The battery can last around two years under normal conditions. High temperatures, high humidity or
other poor conditions may shorten battery lifespan. We recommend changing the battery promptly
when low power indication occurs.
DESCRIPTION
KEYPAD USE & FEEDBACKS
BUTTON DEVICE BATTERY LEDs
ACTION STATUS STATUS FEEDBACK
No pressed No feedback
Long press LED blinks intermittently
(2s<t<30s) every 600ms, 3 times
Short press Not included on Normal LED blinks intermittently
(t<2s) Z-Wave network every 2 seconds, 3 times
Included on Normal No feedback
Z-Wave network
Included on Normal LED blinks intermittently
Z-Wave network every 200ms, 15 times
Long press LED blinks intermittently
(2s<t<30s) every 300ms
Short press Not included on Normal LED blinks intermittently
(t<2s) Z-Wave network every 2 seconds, 3 times
Long press LED turns on for 2,5
(t>30s) seconds an then turn OFF
Z-WAVE COMPLIANCE
Z-WAVE SPECIFICATIONS
SUPPORTED COMMAND CLASSES
COMMAND CLASS ASSOCIATION GROUP INFO
NOTIFICATION SENSOR
COMMAND CLASS ASSOCIATION V2
COMMAND CLASS BATTERY
COMMAND CLASS CONFIGURATION
SPECIFIC_TYPE_
COMMAND CLASS DEVICE RESET LOCALLY
POWER_SWITCH_BINARY
COMMAND CLASS FIRMWARE UPDATE MD V3
REPORTING_SLEEPING_
COMMAND CLASS MANUFACTURER SPECIFIC V2
SLAVE
COMMAND CLASS NOTIFICATION V5
COMMAND CLASS POWERLEVEL
COMMAND CLASS SECURITY
COMMAND CLASS SECURITY 2
COMMAND CLASS SUPERVISION
COMMAND CLASS TRANSPORT SERVICE V2
COMMAND CLASS VERSION V2
COMMAND CLASS WAKE UP V2
COMMAND CLASS Z-WAVE+ INFO V2
ASSOCIATION GROUPS
Group 1 General: Lifeline
5
1. Notification Report. Sensor will send Notification Report when the sensor body and mag-
net removed or combined.
2. Battery Report. Sensor will send BatteryReport when the battery level is low and the
battery report's value is0xFF.
Group Control: Key01
5
1. Basic Set Sensor will send Basic Set when the sensor body and magnet removed or combined
Supported Notification Type
Window/Door is open (0x16)
Window/Door is closed (0x17)
Tampering, Product covering removed (0X03)
WAKE UP
CONFIGURATION
NAME SIZE VALUE
The opening/closing sensor can send a 1 0x00 --> to nodes associated with group 2 when motion alarm is trigge-
command to nodes associated with red and Send Basic set value = ON to nodes associated with group 2 when
group 2 alarm is cancelled.
0xFF --> to nodes associated with group 2 when motion alarm is triggered
and Send Basic set value = OFF to nodes associated with group 2 when
alarm is cancelled.
BATTERY REPLACEMENT
SIMON, S.A.U. Diputación, 390-392 / 08013 Barcelona
DEVICE
ACTION
The device wakes up
The device sends a Node
Info to include or exclude
from the Z-wave Network
Configurations are set to
default values, it sends a
"Device Reset Locally to
Z-Wave controller" and
excludes from current
Z-Wave network
sat@simon.es Tel: (+34) 902109700
www.simonelectric.com