Cequent Performance Products 24953 Instrucciones De Instalación página 8

5. Trim fascia panel - using a tape measure, marker, and utility knife,
6. Reinstall exhaust hangers and side heat shields.
cut a notch in the fascia panel approximately 6-1/4" wide X 1-5/8"
deep, centered as shown.
1-5/8"
6-1/4"
7. Reinstall fascia, taillights, and wiring using the original hardware removed in step 1. Be sure to reconnect wiring to taillights.
©2016 Cequent™ Performance Products, Inc. - Sheet 8 of 24 24953NP 10-12-16 Rev. A
Printed in Mexico