Publicidad
Idiomas disponibles
Idiomas disponibles
1. Bottom fins removal - use 10 mm socket to remove (3) screws from innermost long fins that are connected to chrome piece each
side. Use 10 mm socket and panel removal tool to remove (3) screws and (2) push pins from outermost short fins each side. Unclip all
plastic tabs on the fins and gently detach them from bottom appearance panels, see Figure 2. Set them aside for reinstallation.
Long fin
Short fin
©2017 Cequent™ Performance Products, Inc. - Printed in Mexico
Sheet 6 of 36
24958NP
04-04-17
Rev. A
Publicidad
