Quick Setup - Aqara T1 Manual De Instrucciones

10mm away from the wall; if the switch panel bracket is made of metal, it is recommended
that the antenna be more than 15mm away from the wall (metal bracket).
* If it is installed in a metal pattress, it is recommended to paste the antenna inside the
plastic switch panel, but sufficient space is required for the panel.
* The pasting position should try to avoid the metal, wire, and module itself; if it is installed
on the ceiling or inside the lights, the antenna should avoid too much shielding.
* Please do not squeeze, bend or pull the antenna with force, otherwise the antenna may be
damaged.
4. Turn on the main power switch, and press the button on the module or on the
external switch. If you can turn on/off the device normally, this indicates that it
works normally.

Quick Setup

1. Before activating the accessory, please make sure you have the Aqara Home
app downloaded and Aqara hub installed.
07