Aqara T1 Manual De Instrucciones página 9

2. Please open the app, tap "Home" and then tap "+" in the top right corner to
enter the "Add Device (Accessory)" page. Select "Single Switch Module T1 (With
Neutral)", and add it according to instructions.
* If the connection fails, please move the accessory closer to the Hub and try again.
Effective Range Test: Quick press the push button on the accessory 3 times. If the
Hub makes voice prompts, it indicates that the accessory can communicate
effectively with the Hub.
Indicator Light Description
Indicator Light Status
Blue ligt flashes once
Blue light blinks quickly
Blue light keeps on
Red light blinks quickly
Red light blinks slowly
Status Description
Device power on
Zigbee network is connecting
Zigbee network works properly
High-temperature alarm
Zigbee network is not connected
08