Activating And Operating; Join A Window Covering To A Group; Set A Favorite Position; Operating Window Coverings - Springs Window Fashions Levolor Manual De Instrucciones

Activating and Operating

JOIN A WINDOW COVERING TO A GROUP

NOTE: The LEVOLOR remote will not operate a window
®
covering until the window covering has been added to a GROUP.
1. Press and hold STOP until the WHITE programming
light starts flashing, then release. This puts the remote
in program mode.
2. Press the desired GROUP number (1, 2, 3, 4, 5 or 6) on
the remote. The BLUE GROUP indicator light above
the GROUP button will flash to show it is selected.
3. With one hand press and continue to hold the manual
control button located on the window covering headrail.
4. While continuing to hold down the manual control
button, use your other hand to press and hold
OPEN on the remote until the window covering moves
slightly to indicate it has been joined to the GROUP.
5. Release both buttons.
6. To exit program mode press and hold
the lights stop flashing.
NOTE: It is recommended that only similar window coverings
be included in a GROUP because of differences in product
features and operation.

SET A FAVORITE POSITION

Each window covering has one FAVORITE position. Default
setting is half way down. Setting a new FAVORITE position
overwrites any previous setting.
1. Using the manual control button located on the
window covering headrail open or close the window
covering to the preferred FAVORITES position.
2. Press and hold STOP until the WHITE programming
light starts flashing, then release. This puts the remote
in program mode.
3. With one hand press and continue to hold the
manual control button located on the window
covering headrail.
4. While continuing to hold down the manual control
button, use your other hand to press and hold
FAVORITE on the remote until the window covering
moves slightly to indicate it has set this window
covering position as your FAVORITE.
5. Release both buttons.
6. To exit program mode press and hold
the lights stop flashing.
8
Remote Control Guide

OPERATING WINDOW COVERINGS

Once the window coverings have been joined to a GROUP
or multiple GROUPS, the remote is ready to operate the
window covering(s). Multiple window coverings can be
operated at the same time.
STOP until
♥
STOP until
Activating and Operating
1. To wake up the remote press
indicator light from the last GROUP(S) selected
will be highlighted and active.
2. Press ALL or GROUP 1, 2, 3, 4, 5 or 6 button(s) to
select specific window covering(s) to operate. The
selected GROUP(S) BLUE indicator light above
the number will light to show they are selected.
3. Multiple GROUP buttons may be selected at the
same time.
4. To deselect a GROUP, press the GROUP button again.
The BLUE indicator light above the GROUP button
will go out.
5. Press OPEN to open the selected window
covering(s).
6. Press CLOSE to close the selected window
covering(s).
7. Press STOP to stop window covering anywhere
along its travel path.
8. While the window covering is in motion, press the
opposite of its motion (
reverse direction.
9. Press FAVORITE and window covering(s) will
♥
move to your preset FAVORITE position.
NOTE: The tilt up and tilt down arrows do not apply to this
product category.
STOP. The BLUE
OPEN or CLOSE) to
9
Remote Control Guide