Dmx Linking; Dmx Values - Chauvet COLORrail IRC Guía De Referencia Rápida

COLORrail™ IRC QRG
AC Power
Fuse
Replacement
Power Linking

DMX Linking

Starting Address
Master/Slave
Connection

DMX Values

2-c
Channel Function
3-c
Channel Function
This product has an auto-ranging power supply that can work with an input
voltage range of 100–240 VAC, 50/60 Hz.
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and
replace with a fuse of the exact same type and rating.
5. Re-insert the fuse holder and reconnect power.
Disconnect the product from power before replacing the fuse.
You can link up to 17 COLORrail™ IRC products at 120 VAC or 32 units
at 230 VAC.
The COLORrail™ IRC can work with a DMX controller when linked by
DMX serial connections. Instructions for connecting and configuring this
product for DMX operation are in the User Manual. If you are not familiar
with DMX, download the DMX Primer from www.chauvetlighting.com.
To ensure full access to all channels in each DMX mode, the highest
recommended DMX address is 487.
The COLORrail™ IRC uses the DMX data connection for its Master/Slave
mode. Instructions for connecting and configuring this product for
Master/Slave operation are in the User Manual.
1 Color Macros
Auto Program
2
Speed
1 Red
2 Green
3 Blue
Value Percent/Setting
000 ó 007 No function
008 ó 015 Red
016 ó 023 Yellow
024 ó 031 Green
032 ó 039 Cyan
040 ó 047 Blue
048 ó 055
Magenta
056 ó 063 White
064 ó 231 Auto programs
232 ó 255 Sound-active mode
000 ó 255 Slow to fast (when CH.1 is from 064–231)
Value Percent/Setting
000 ó 255 0–100%
000 ó 255 0–100%
000 ó 255 0–100%
5
EN