Dmx Linking - Chauvet COLORADO 1-TRI IP Guia Del Usuario

EN COLORado™ 1-Tri IP v2 QRG
AC Power This product has an auto-ranging power supply that can work with an input
voltage range of 100~240 VAC, 50/60 Hz.
Power Linking You can link up to 18 COLORado™ 1-Tri IP v2 products at 120 VAC or
34 at 230 VAC. Never exceed this number. Power linking cords can be
purchased separately.
AC Plug
Connection Wire (U.S.) Wire (Europe) Screw Color
AC Live Black Brown Yellow/Brass
AC Neutral White Blue Silver
AC Ground Green/Yellow Green/Yellow Green

DMX Linking

The COLORado™ 1-Tri IP v2 will work with a DMX controller using a regular
DMX serial connection. A DMX Primer is available from
www.chauvetpro.com.
DMX Connection The COLORado™ 1-Tri IP v2 uses a regular DMX data connection for its
DMX personalities: TR16, TOUR, ARC.1, AR1.d, AR1.S, and HSV. See the
User Manual to connect and configure for DMX operation.
Note: For optimum control of the 16-bit dimming channels in the TR16
personality, be sure that both dimming curves in SET > DIMX and SET >
CURV are set to OFF.
Master/Slave The COLORado™ 1-Tri IP v2 uses the DMX data connection for its
Master/Slave mode. See the User Manual to connect and configure for
Connection
Master/Slave operation.
3