Complete Installation; Operation; Cleaning And Maintenance; External Cleaning - Furrion FHO24R11-SS Manual Del Usuario

Complete Installation

1. Replace the grease filter to the range hood and press the
release tabs until you hear a click. (Fig. 18) The grease
filter is securely attached to the range hood. (Fig. 19)
Fig. 18

Operation

Cleaning and Maintenance

WARNING
ELECTRICAL SHOCK HAZARD
● Disconnect power before servicing.
● Replace all parts and panels before operating.
● Failure to do so can result in death or electrical shock.
WARNING
Fire Hazard
The range hood must be kept clean, as build up of grease
can be a fire hazard.
● Never soak the whole range hood in water or submerged
in water to avoid damaging the product.

External Cleaning

Proper maintenance of the range hood will ensure proper
performance of the unit. Wipe the range hood frequently with
warm soapy water using a mild detergent.
NOTE: Never use scouring pads or abrasive cleaners. Never
use excessive amounts of water when cleaning particularly
around the control panel.
Fig. 19
2. Check the operation of the range hood fan and light. See
the "Operations" section.
3. If range hood does not operate, check to see whether a
circuit breaker has tripped or a household fuse has blown.
Disconnect power and check wiring connections.
Description
Press to turn on/off the range hood.
On/Off Button
Press to change fan speed to level 1.
Speed Button
Press to change fan speed to level 2.
Speed Button
Press to change fan speed to level 3.
Speed Button
Press the light button once to turn on the
Light Button
light, press twice to turn off.
● Hot water with soap or detergent is all that is usually
required.
● Follow all cleaning by rinsing with clear water. Wipe dry
with a clean, soft cloth to avoid water marks.
● For discolorations or deposits that persist, use a non-
scratching household cleanser or stainless steel polishing
powder with a little water and a soft cloth.
● For stubborn cases, use a plastic scouring pad or soft
bristle brush with cleanser and water. Rub lightly in
direction of polishing lines or "grain" of the stainless
finish. Avoid using too much pressure, which may mar the
surface.
● DO NOT allow deposits to remain on surface for long
periods of time.
● DO NOT use ordinary steel wool or steel brushes. Small
bits of steel may adhere to the surface causing rust.
● DO NOT allow salt solutions, disinfectants, bleaches, or
cleaning compounds to remain in contact with stainless
steel for extended periods. Many of these compounds
contain chemicals which may be harmful. Rinse with water
after exposure and wipe dry with a clean cloth.
● Painted surfaces should be cleaned with warm water and
mild detergent only.
9