Troubleshooting - Leggett & Platt PRO-MOTION perfomance Queen Manual Del Usario

In the event the adjustable base fails to operate, investigate the symptoms and possible
solutions provided in the chart below:
SYMPTOM
Remote control will not activate base.
Head or foot section will elevate, but will not
return to the horizontal (flat) position.

TROUBLESHOOTING

SOLUTION
• Verify power cord is plugged into a working, grounded
electrical outlet. A grounded, electrical surge protection
device is recommended. Test outlet by plugging in
another working appliance.
• Verify remote control is plugged into the motor.
• Unplug power cord, wait 30 seconds and plug in to
reset electronic components.
• Electrical circuit breaker may be tripped. Check
electrical service breaker box to verify.
• Defective surge protection device or electrical outlet.
Test outlet by plugging in another working appliance.
• Base mechanism may be obstructed. Elevate base and
check for obstruction. Remove obstruction.
• Head section may be too close to the wall.
• Headboard may be too close the edge of the mattress.
Verify a 1.5" (38.1mm) to 2" (50.8mm) distance
between headboard brackets and mattress. Adjust if
required.
Performance Models Pro-motion Owners Manual 99301466-b
15