Check the amount of water supplied to
the ice tray
1. Lift up and pull out the Ice maker bucket in the
freezer.
2. When you press the Test button for 3 seconds,
the ice cube container is filled with water from
the water supply tap.
Check to make sure the amount of water is
correct (see the illustration).
If the water level is too low, the ice cubes will
be small.
This is not a problem with the ice maker but of
the water pressure in the pipe.
When this problem occurs, contact the dealer
service center to check the amount of water
supplied.
CHECK THE WATER LEVEL
Freeler Arm TEST BUTTON
3. In case ice does not come out, pull out the ice
bucket and press test button located on the
bottom of ice maker.
DA68-02981E-00.indb 17
TOO HIGH
OPTIMUM
LEVET
TOO LOW
English - 17
13. 12. 12.
3:07