Alfa Romeo FIX&GO automatic Manual Del Usuario página 18

fig. 6
make sure the compressor switch A-
fig. 6 is set to 0 (off), start the en-
gine and fit plug A-fig. 7 into the
outlet/cigar lighter on the front con-
sole and then turn on the compressor
by setting switch A-fig. 6 to I (on);
inflate the tyre to the proper pressure
value. Check tyre pressure on gauge
with compressor off to ob-
B-fig. 6
tain precise reading;
18
A0E0213m
fig. 7
if after 5 minutes it is still impossi-
ble to reach at least 1.5 bar, disen-
gage compressor from valve and cur-
rent outlet, then move the car forth
for approx. 10 metres in order to dis-
tribute the sealing fluid inside the tyre
evenly, then repeat the inflation op-
eration;
if after this operation it is still impos-
sible after 5 minutes to reach at least
1.8 bar, do start driving since the tyre
is excessively damaged and the quick
tyre repair kit cannot guarantee suit-
able sealing, contact Alfa Romeo Au-
thorized Services;
after reaching the proper tyre pres-
A0E0217m sure, start driving immediately;
Apply the sticker in a
visible position for the
driver to indicate that the tyre
has been treated with the
quick tyre repair kit. Drive
carefully especially when cor-
nering and do not exceed 80
km/h. Avoid heavy braking
and accelerating.
WARNING