Kenmore 790.9261 Serie Manual De Uso Y Cuidado página 23

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Removing and Replacing the Oven Door:
The door is heavy. For safe, temporary storage,
lay the door flat with the inside of the door facing down.
To remove the oven door
1.
Open oven door completely, horizontal with floor (See
Figure
16).
2. Pull the door hinge locks on both left and right door hinges
down from the oven frame completely towards the oven
door (See
Figure
17). A tool such as a small flat-blade
screwdriver may be required.
3. Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (See
4. Close the door to approximately 10 degrees from the door
frame (See
Figure
18).
5. Lift the oven door hinge arms over the roller pins located on
each side of the oven frame (See
To replace the oven door:
1.
Firmly grasp both sides of oven door along the door sides.
Do not use the oven door handle (See
2. Holding the oven door at the same angle as the removal
position, seat the hook of the hinge arm over the roller pins
located on each side of the oven door frame (See
and
Figure
19). The hook of the hinge arms must be fully
seated onto the roller pins.
3. Fully open the oven door, horizontal with floor (See
Figure
16).
4. Push the door hinge locks up towards and into the oven
frame on both left and right oven door hinges to the locked
position (See
Figure
17).
5. Close the oven door.
Important note: Special door care instructions - Most oven doors
contain glass that can break. Do not hit the glass with pots,
pans, or any other object. Scratching, hitting, jarring, or stressing
the glass may weaken its structure, causing an increased risk of
breakage at a later time. Do not close the oven door until all of
the oven racks are fully in place.
Figure
18).
Figure
19).
Figure
18).
Figure 18
Figure 16: Door hinge location
Figure 17: Door hinge locks
oven
door
Figure 18: Holding door for removal
roller
pin
hinge
arm
Figure 19: Replacement and location of hinge arm and roller
pin
23
Care and Cleaning
Oven door
hinge
locations
about
10°
hinge

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido