EKO DUO Manual Do Usuário página 8

2.1
Setup
Install included EARPIECE by plugging the audio jack
into the 3.5mm audio port at the base of DUO and
tightening the threads.
EARPIECE
2.2
Charging
To charge DUO, place the device on the Wireless
Touch Charging Pad. Connect the charging pad to a
power source using the included USB charging cable
and power adapter. The LED light ring on DUO will
begin to flash to signal the charging status. All of
the LEDs in the ring will light up when the device is
fully charged. DUO should be periodically recharged
even when in storage. Lithium ion batteries slowly
lose charge when in storage and may fall to an
unacceptably low level, damaging the battery.
NOTE: DUO will not operate or connect to the Eko App
while charging.
Wireless Touch Charging Pad
P.
8
Micro USB