Klarstein Hot Spot Pebble Manual Del Usuario página 26

EN
26
For example: Setting to Wednesday, 9:30 AM under 25 °C under II heating, please
refer to the following picture:
Set temperature
1. During working status, press the button
default.
2. Press the button or
49 °C).
3. Press the OK button
For example: The current ambient temperature is 15 °C, when set temperature to
25 °C, the display shows as below::
If cancel the temperature setting, press the button
position. At the same time, the digital tube displays "--", and the "°C" indicator goes
out.
Set weekly program
After complete setting of current TIME/DAY, below is the steps to set weekly program:
1. Press the POWER button
2. Press the P button
(see display A on the picture below).
3. Press the DAY button
Sunday: d1-d7). Such as set Monday: see display B on the picture below.
or
to set desired temperature (temperature range: 10-
to confirm the setting.
. The appliance enters into working status.
. The display shows "P", it enters into weekly program setting
. The display shows d1-d7, set to working day (Monday-
. The display shows "23" as
to work in the low or high heating